You can find all the printers installed on your computer under Setup/Printer.
HINT: Here you can quickly and easily test the printing from PC CADDIE:
More detailed settings are usually not necessary with PC CADDIE. However, if you want, for example, to always use a particular printer for bag tags, you can store this information in a template. Please do not hesitate to contact the PC CADDIE Support.
PC CADDIE offers you the possibility to work with various different layouts (for example a clear, legible font for lists, an elegant slightly larger font and a logo for invoices, etc.). These settings can be made in the printer dialog underSetup/Printer.
Press Settings to open the basic settings of the selected layout. The desired changes can be made and stored accordingly.
Click on the corresponding Setup buttons for making the settings described at (1).
The two options are independently of one another and do not have to have anything in common.
This will open the main settings menu or the selected print layout:
These layouts are stored in the PCCADDIE/DRUCKER folder (or “Drucker” = printer in German).
Right-click on the GDI files and press “Delete” for removing them.
There are some predefined, non-changing texts or dialogues in PC CADDIE. For example, the contributions’ list is displayed in a fixed format in the layout of the financial statements:
Click on the button Translation to enter the print dialog where you can enter the print text translation:
The following window opens:
Enter the text you want to change, and the new text.
The original text is now replaced by the new one.
Note that this translations affects all PC CADDIE areas. For example, translating “bar” to “cash” also transforms “Barbara” in “cashcasha” . Remove temporary translations after use them, or be aware that you cannot control every consequence of the print text translation.
HINT: Setup/Program Options/ Print text translation directly opens the Translation of print text.
Make the following settings for configuring PC Caddie to automatically select a printer tray.
Select the printer and press Shift (ctrl) + F11. The following window opens:
Scroll to DC_BINNAMES.
Enter the tray’s number in the marked brackets ().
Then go to Settings.
For using the command SOURCE: enter the same tray number as before. In this example, 1.